Mission: Spring Ecosystem Monitoring (EcoMon) Survey (Plankton and Hydrographic Data)

Geographic Area of Cruise: Atlantic Ocean

First Day at Sea (Tuesday, May 30)

Today, my shift began at 12 noon. It probably was not the best idea to have awakened at 6:00 a.m., but I am not yet adjusted to my new work schedule and I did not want to miss one of Margaret’s hearty breakfasts.

We cast out from the Naval Station Newport mid-morning. It was a clearer and warmer day compared to the day before—perfect for capturing pictures of the scenic harbor. I spent much of the morning videoing, photographing, and listening to the sounds of waves as they moved around the ship. I like to spend a lot of time on the bow as well as the flying bridge (the area at the top of the ship above the bridge where the captain operates the vessel). Before lunch, I was beginning to feel a little seasick from the gentle swaying of the ship. I could only hope that I would find my sea legs during my first watch.

Gordon Gunter gracefully made its way alongside Martha’s Vineyard and Nantucket—two islands off the coast of Cape Cod. Standing on the flying bridge and looking out at the horizon alleviated my sea sickness. At this position I was able to observe and photograph an abundance of wildlife. Seeing the sea birds in their natural habitat is a reminder that I am just a visitor on this vast ocean which so many animals call home. Watching birds fly seamlessly above the waves and rest atop the water gives me a yearning to discover all I can about this unique ecosystem and ways in which we can protect it.

The phrase, “to find one’s sea legs” has a meaning much deeper than freedom from seasickness. Finding your sea legs is the ability to adjust to a new situation or difficult conditions. Everything on board Gordon Gunter was new and sometimes difficult for me. Luckily, I have help from the best group of scientists and NOAA Corps crew a Teacher at Sea could ask for.

At 8 p.m. I was part of the leg’s first oceanography station operation. I watched closely as the bongo nets were tied tightly at the end then raised into the air by the winch and J-Frame for deployments into the sea. While the bongo nets and CTD were sinking port side, I looked out at the horizon and much to my amazement, saw two humpback whales surfacing to the water. The mist from their blows lingered even after they descended into the water’s depths.

Once the bongo nets where recovered from the ocean, the crew and I worked quickly but with poise. We used a hose to spray the nets so that all the plankton would reach the bottom of the net when we dumped them into a container. I observed fellow scientist Leann pour each bongo’s sample into a jar, which she filled with water and then a small portion of formalin to preserve the samples. It began and was over so quickly that what took about an hour felt like ten minutes.

An hour later we reached our second station, and this time I was ready! Instead of mostly observing as I did during the first time, this time I was an active participant. Yes, I have a lot left to learn, but after my first day at sea and three stations under my belt, I feel like my sea legs are growing stronger.

Date: June 1, 2017

En route to our first oceanography station just past Nantucket, Electronics Technician Tony VanCampen and my fellow day watch scientist Leann Conlon gave me an overview on how each sampling is conducted. This is where the pieces of equipment I described in my previous blog post (bongo nets and CTD) come into play.

Science is very much a team effort. I learned that a deck crew will be in charge of maneuvering the winch and the J-frame. Attached to the cable will be the bongo nets and the CTD which are carefully lowered into the ocean.

Bongo nets allow scientists to strain plankton and other samples from the water using the bongo’s mesh net. At each station the bongo will be sent down to within 5 meters of the bottom or no more than 200 meters. After the bongo has reached its maximum depth for a particular station, the net is methodically brought back to the surface—all the while collecting plankton and sometimes other small organisms like tiny shrimp. It usually takes about 20 minutes for the bongo nets to be cast out and returned on board with the samples.

Once the bongo nets have returned from the water to the aft (back) deck, our work begins. As a part of the Science Party, it is my job to rinse the entire sample into containers, place the plankton into jars, add formalin to jars that came from the big bongos and ethanol to jars that came from the small bongos. These substances help preserve the specimens for further analysis.

At the conclusion of the cruise, our plankton samples will be sent to the Sea Fisheries Institute in Poland where scientists and lab crew sort and identify the plankton samples which gives NOAA scientist an idea of the marine environment in the areas in which we collected samples.

Our Chief Scientist is David Richardson. Dave has been with NOAA since 2008. He keeps track of the digits on the flowmeter (resembles a small propeller) inside the bongo. The beginning and ending numbers are input into the computer which factors in the ship’s towing speed to give us the total volume of water sampled and the distance the bongo net traveled.

At various oceanography stations we perform a CTD cast which determines the conductivity, temperature, and depth of the ocean. The CTD is attached to the bongo nets or the CTD is mounted within a frame, which also holds several bottles for sampling seawater along with a mechanism that allows scientists on board the ship to control when individual bottles are closed. The CTD is connected to the ship by means of a conducting cable and data are sent electronically through this cable, in real-time, to the scientists on the ship. The scientists closely monitor the data, looking for temperature and particle anomalies that identify hydrothermal plumes. As the CTD is sinking to the desired depth (usually 5-10 meters from the bottom), the device measures the ocean’s density, chlorophyll presence, salinity (the amount of salt in the water), temperature, and several other variables. The CTD’s computer system is able to determine the depth of the water by measuring the atmospheric pressure as the device descends from the surface by a certain number of meters. There is a great deal scientists can learn from launching a CTD in the sea. The data tells us about dissolved inorganic carbon, ocean water nutrients, the levels of chlorophyll, and more. From the information gathered during CTD casts, researchers can investigate how factors of the ocean are related as well as the variation of organisms that live in the ocean.

The highlighted lines are stations completed in the first leg. The circle indicates the stations for my leg of the survey.

It is fascinating to see the communication between the scientists and the NOAA Corps crew who operate the ship. For instance, NOAA officers inform the scientists about the expected time of arrival for each station and scientists will often call the bridge to inquire about Gordon Gunter’s current speed and the weather conditions. Even computer programs are connected and shared between NOAA Corps crew and the scientists. There is a navigation chart on the monitor in the bridge which is also displayed in the science lab so everyone knows exactly where we are and how close we are to the next station. The bridge must always approve the deployments and recovery of all equipment. There are closed circuit video cameras in various places around the ship that can be viewed on any of the monitors. The scientists and crew can see everything that is going on as equipment gets deployed over the side. Everyone on Gordon Gunter is very much in sync.